12 valve high egts
#1
12 valve high egts
im having problems out of my 12 valve just put twins on it the top turbo is a tec 62 the bottom is a garret ht3b i have 4" ex. 4k govener springs afc turned all the way out 100 plate timming at 14.5 stock injectors havent decided what i want to go with yet i tow alot is the reason for the twins everbody say they run cooler mine will 1200deg. at the drop of a hat a little help please
#2
Well running twins with stock injectors doesn't help to much because your more than likely not getting your primary to get going.... Some SDX 5x.012 injectors would be a mild upgrade and probably be able to get your turbos moving along with a nice bump in power while being able to pull some descent size loads
But, what kind of transmission do you have? Stock auto, manuel? I only ask because you didn't say anything about it. The stock auto want last to long, also a standard will only go so far as well without a good clutch?
But, what kind of transmission do you have? Stock auto, manuel? I only ask because you didn't say anything about it. The stock auto want last to long, also a standard will only go so far as well without a good clutch?
#3
its a 5 speed im fixing to go threw it and re-build it i have a dual disc south bend im goin to put in it and i was thinking about 5x.014 for injectors but didnt no if that be to much for towing i thought it might be ok beens i got so much air there to suport it how much horsepower & turque could i get out off this set up with 5x.012 or 5x.014
Last edited by bean farms; 09-29-2010 at 12:14 AM.
#4
#5
#6
#7
#10
ok ill try that do you think that will lower my egts . what about injectors? what do i need to go with and still be able to tow and what amount of horsepower and turque can i get will bigger injector lines help any i would like to get that lope and will that kill my fuel milage
Bigger fuel lines do nothing for power and it's not a VP pump so you won't get a lope on your truck from sticking bigger lines on it. Also I don't think you'll want a lope if your towing, as a loping engine tends to be less street friendly