Can anyone tell me where I can buy a replacement glass and holder for my 1996 3500? Someone hit me last night and luckily the dually survived but the drivers side mirror did not. My truck has the GIANT stainless assembly bolted to the door not the nice small plastic mirror like the late3 models. By the way, would one of the new styles work? It would be a nice upgrade if I didn't have all those holes in the door. I have checked EBay and found none of the old styles. Thanks in advance for any help! -

You'd most likely have to go to a glass shop to get it replaced. I know those were the only people who could get the glass and cut it for my tow mirrors (off an 01). But you can upgrade your mirrors to any mirror that has been used on a 2nd gen. The 3rd gen mirrors do not fit, the molding around the mount is bigger than our 2nd gens -

rkadcock's Sig:

97 2500 12V Cummins
Autometer C2 Boost Pyro Trans Temp Oil Temp Nitrous Pres. Fuel Pres. Gauges
MBRP 4" TB Straight Exhaust
AFE Stage 2 Cold Air Intake
0 Plate FF, AFC Tuned & FF Airdog 150
DDP Competetition Injectors Industrial Injection 14mm IP
Built Suncoast Transmission
Banks Twin Ram Intake
Turbonetics IC
ARP Cylinder & Main Studs
60lb Valve Springs DDP Comp (5K) GSK
ATS Aurora Compound Turbos

07 3500 SRW 5.9 Cummins

http://www.dieselbombers.com/groups/...o-bombers.html

yes the new style will,but it has to be for a 2nd generation.i bought one for $78 and change.some of them are $250 apiece.it looks excellent too,it don't look cheap and it works well,everything is good and tight,it's a great deal,i wouldn't even mess with your old mirrors,i would buy a set of the fold outs.2000 2001 Dodge Ram 2500 3500 Side Tow Mirror Right:eBay Motors (item 110441374049 end time Nov-01-09 08:45:34 PST) -

BAD ASS RAM's Sig:

1997 RAM 2500 12 VALVE.100hp INJECTORS,#100 FUEL PLATE FULL FOREWARD, MODIFIED AND TUNED AFC HOUSING,HX35/40 HYBRID,NO SILENCER RING ,WASTE-GATE PLUGGED.BOOST,AND PYROMETER GAUGES.W/BUILT AUTO TRANNY AND BILLET CONVERTER,TC LOCK UP SWITCH,CHAMBERED DUAL 5"SLASH CUT STACKS,TRACTION BARS AND 17"X9"MOTO METAL WHEELS,WITH 295/75/17 NITTO TERRA GRAPPLERS

can anyone tell me where to find a set of those mirrors that will fit a 97. i ws towing a crap spreader and the tire blew out and threw a chunk that took out my pass mirror and i want a set of those instead of going with stockers -

12.valve.hauler's Sig:

97 ctd 4x4,230,000,215hp pump,no plate,star wheel close to stock,silencer ring, open turbo,courser mt's, 5 inch mitre cut stack(stuck up under the bed)

LMC truck -

xzaq103's Sig:

SOUTHERN DIESEL EXTREME
WWW.SouthernDieselX.com
Home of SDX Injectors!!!

479-799-3953

1998 2500 12 valve QC Goerend trans, 4x4, gauges, Benched 500+cc 180 pump NO plate, 5" single stack, ICE BOX intake, 4K GSK, 60lb valve springs, 24* timing, AirDog 150, SDX 5X18s, 3rd Gen wheels Engineered Diesel 64/68 turbo, ARP studs. 13.4/99mph

Pulling Project 1965 Power Wagon "Bugly"

go to the link i put in the last post i made and thos will,the ones for a 2000 will work. -

ive still got the older set layin in the shop any body need em ? there was nothing wrong with them i just took em off when i got the flipouts -

Biggy B's Sig:

95 4x4 cummins built p pump #0 plate full ceramic clutch, 2inch levelers, stacks

these are the ones I need...what do you want for yours? Are they this style? I just need the head of the mirror -

Attached Images

Dodge-Ram_3500_1996_1024x768_wallpaper_02.jpg (85.0 KB, 8 views)

man that truck is all shiny and everything haha -

12valvetater's Sig:

1997 2500 4x4, 260,000 mi, nv4500, EMS lockout hub conversion, EMS vacum/delete, fully rebuilt engine, o-ringed head and block, 12mm ARP headstuds, 60 lb valve springs, 4k gsk, 4in down pipe to 5in behind the wheel, air dog2 165gph, Valair organic single disk, updated 5th gear nut, pyro and boost, street/towing cam from East Coast Diesel, NO fuel plate

yep thats what they are, do you need both sides , they r in good shape to , reckon what it would cost to ship from me to you -

so the 98 to 01 mirrors wil fit other than the heater part -

Yup and I'm sure theirs a way to rig the heater to work... -

i think i read something if you want power and heat you need to by a set of 3rd gen mirrors and a set of 2nd gen mirrors -

If you figure out how to add the heat I'd really like to know.. -

You can get the KoolVue towing mirrors for the 2nd gen trucks, power and heated. I have a set on the '01 and honestly I can't tell any difference in quality between them and the OEM towing mirrors on my '05. -

mishkaya's Sig:

'01 Dodge 6spd, Mach 7's, Helix 2 cam & springs, twins, Adrenaline, DD clutch, DOR bumper, etc...