12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

No Charging system, no tach, no wait to start

Thread Tools
 
Search this Thread
 
  #1  
Old 12-29-2016, 09:40 PM
Andyhc1's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2015
Location: Dickson, TN
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default No Charging system, no tach, no wait to start

Ive been chasing this problem for months now. No charging system, no tach, no wait to start, no speedo and about out of money . Ive replaced cps, batteries, alternator, pcm, and chased down seems like 1000 wires. And advice will be greatly appreciated im out if ideas.
 
  #2  
Old 12-30-2016, 09:03 AM
Diesel.121's Avatar
Newbie
Join Date: Dec 2016
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Have you tried driving it since this started or has it been parked? Is it an automatic or manual transmission?
 
  #3  
Old 12-30-2016, 09:50 AM
Andyhc1's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2015
Location: Dickson, TN
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Ive driven it 2 or 3 times since it started all this ( enough to drain the batteries) . And its a manual transmission
 
  #4  
Old 04-14-2017, 10:58 PM
Mahir Sa'id's Avatar
Diesel Fan
Join Date: Feb 2017
Location: flushing, mi
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default

im having the same problem it would be nice for someone to help us out
 
  #5  
Old 04-15-2017, 05:18 AM
JBearSVT's Avatar
Diesel Bomber
Join Date: Oct 2010
Location: New England
Posts: 1,325
Likes: 0
Received 59 Likes on 58 Posts
Default

Dash harness
 
  #6  
Old 04-16-2017, 09:48 PM
Andyhc1's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2015
Location: Dickson, TN
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Figured it out

I actually figured it out a couple months ago. A wire had gotten pushed out of the back of the fuse panel goin to the main "engine" fuse or somethin like that. Kinda feel like a D.A for not finding it before i put all that money in it, but hey live and you learn right?
 
  #7  
Old 04-17-2017, 04:51 AM
JBearSVT's Avatar
Diesel Bomber
Join Date: Oct 2010
Location: New England
Posts: 1,325
Likes: 0
Received 59 Likes on 58 Posts
Default

Seriously? How the...? Hm. Interesting.
 
  #8  
Old 04-19-2017, 08:08 PM
Andyhc1's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2015
Location: Dickson, TN
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

I had installed an airdog and it runs into the fuse block. I guess when i hooked it up the first time i pushed the wire out. Kind of a one in a million thing i guess
 
  #9  
Old 04-20-2017, 04:48 AM
JBearSVT's Avatar
Diesel Bomber
Join Date: Oct 2010
Location: New England
Posts: 1,325
Likes: 0
Received 59 Likes on 58 Posts
Default

Yeah, I'd never heard of that before. One more for the lists.
 
  #10  
Old 05-22-2017, 10:56 AM
Here4thecake's Avatar
Newbie
Join Date: May 2017
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I have bun chasing this same issue for a week. Same symptoms: no tach, a/c, O/D or torque lock up, alt isn't charging. I first swapped out the Ess. With proper gapping it still hasn't fixed the problem. I started chasing other sensors and found my tps had some torn wires at the connector. Replaced that with no luck. I am receiving signal and power at both sensors 8.8 and 3.8 respectively. I have also been checking grounds and continuity wherever I can. Does anyone have any advise!? I'm a patient person but this is getting old. Would the PCM be bad and still be sending power and signal?
 



All times are GMT -5. The time now is 11:38 AM.