NEED HELP WITH VALVE SPRINGS 60#
#1
NEED HELP WITH VALVE SPRINGS 60#
Got a 96 5 speed. getting a bunch of work done to it. Im getting 4000 gov. springs put in. thinking about doing valve springs at the same time. I found some on XDP for $80 for 6. so $160 for all 12. Not sure if they are stock or stronger then stock. They are 60#. here is the ad. anyone know????
BD-Power 60# Valve Springs 1030060
---AutoMerged DoublePost---
I got 4gsk springs already. just need valve springs that will hold 4000 and be safe doing it. wont ever go that high only at truck pulls
BD-Power 60# Valve Springs 1030060
---AutoMerged DoublePost---
I got 4gsk springs already. just need valve springs that will hold 4000 and be safe doing it. wont ever go that high only at truck pulls
Last edited by first-gen-tough; 04-08-2013 at 06:14 PM. Reason: Automerged Doublepost
#4
#7
stock springs are actually around 50# seat pressure, 60# springs aren't actually a real good upgrade, there better then stock but but high boost and high rpm will still float them. There not 60# heavier. for a good spring check out hamiltons or a comp spring with the right installed height and spring pressures.
Thread
Thread Starter
Forum
Replies
Last Post
Bill in Ballard
Ford 83-94 6.9 and 7.3L General
3
03-13-2016 07:42 PM
Jake12valve
Diesel In Distress - Support Ticket
5
05-10-2015 11:57 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-01-2015 08:41 PM
POWERSTROKEMANIAC
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
12-30-2014 11:32 AM