crank seal hellpp!!
#1
crank seal hellpp!!
i bought a timing gasket kit to do kdp. it came with a seal, installer, seal saver, and athin black dust shield im guessin.
i used the metal installer and installed the seal from backside till seal bottomed out. NOW i dont see what im suppose to do with the thin black one, do i need it, cuz the stock one didnt even have one? who has done this that can help
i used the metal installer and installed the seal from backside till seal bottomed out. NOW i dont see what im suppose to do with the thin black one, do i need it, cuz the stock one didnt even have one? who has done this that can help
#2
#3
never posted picture before but have no picture , just did a little more research and found not all kits have the little thin seal, it is a dust seal i out on before i put damper back on, mainly for equipment or offroad use thanks for the reply hope this answers anyone elses question that runs into this problem
---AutoMerged DoublePost---
got it and the dust shield that was seperate went on last obviously, but when i put it all on the seal was tight on the crank, so i thought for sure it would leak since not tight but didnt leak , but i got it thanks
---AutoMerged DoublePost---
got it and the dust shield that was seperate went on last obviously, but when i put it all on the seal was tight on the crank, so i thought for sure it would leak since not tight but didnt leak , but i got it thanks
Last edited by codycatract; 01-26-2013 at 05:18 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
ish1521
Ford Powerstroke 03-07 6.0L
1
08-26-2015 08:42 PM
Flikkie2001
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
04-02-2015 01:36 PM