Fuel pump problems
#1
Fuel pump problems
I put a new #5 fuel plate on my 12v and now it won't idle and won't accelerate at all went in drive. What did I do wrong???
---AutoMerged DoublePost---
Also when I took off the fuel shut off solenoid it had two blots on the top and one on the cab side. Why does everything and everyone say there is only two????
---AutoMerged DoublePost---
The rubber boot on the solenoid is torn. Is that a problem??
---AutoMerged DoublePost---
Also when I took off the fuel shut off solenoid it had two blots on the top and one on the cab side. Why does everything and everyone say there is only two????
---AutoMerged DoublePost---
The rubber boot on the solenoid is torn. Is that a problem??
Last edited by LeeVining12v; 11-26-2012 at 07:54 PM. Reason: Automerged Doublepost
#2
I did the same thing when i put my 10 plate in. I had to take the afc housing back off and found that afc foot had bound up, i'm guessing on the governor arm. So i put it back on and made sure that it wasn't hanging up as i slid the housing back on. It fixed it. My truck acted the exact same as ours is now.
#3
I'm going to take it apart again today. Do u have any pics that would really help. Thanks for the answer.
---AutoMerged DoublePost---
The afc foot won't go up the plate.
---AutoMerged DoublePost---
How can I get more boost. I'm only hitting 22 psi.
---AutoMerged DoublePost---
The afc foot won't go up the plate.
---AutoMerged DoublePost---
How can I get more boost. I'm only hitting 22 psi.
Last edited by LeeVining12v; 11-27-2012 at 05:57 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
HardLuck
Diesel In Distress - Support Ticket
0
06-24-2015 08:04 AM
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:55 PM
Gm3500
Chevy/GMC 6.2L and 6.5L
9
05-07-2015 11:01 AM